PremiumCord USB-C na HDMI 4K,Wireless extender 20m

PremiumCord USB-C to HDMI 4K@60Hz Wireless extender at 20m

- Wireless HDMI signal transmitter and receiver for 20m connection
- USB-C male input connector
- HDMI male output connector
- Supports wireless transmission of 4K@60Hz and Full HD 1080p resolution up to 20m
- Maximum bitrate: 18Gbps
- Wifi Frequency: 5 to 5.8GHz
- Supports video resolution: 4K@60Hz/50Hz/30Hz, 2K@60Hz/50Hz/30Hz, FULL HD 1080p@50/60Hz, 1080i@50/60Hz, 720p@50/60Hz
- Supports:3840x2160@24/30/50/60Hz (YUV 4:4:4, YUV 4:2:2 and RGB),1080P@50/60Hz, 720P@50/60Hz, 1920x1200@60Hz
- Supports HDMI2.0
- Fully supports HDCP2.2
- Supports SSID pairing
- Audio format PCM
- The transmitter is a small dongle that plugs directly into the USB-C connector of your computer or laptop. The laptop USB-C connector must have sufficient 5V/1.5A power supply
- The receiver is a small dongle that plugs directly into the HDMI connector of a monitor or projector. The receiver is powered by a USB micro cable that plugs into the receiver and on the other side into a USB port or 230V USB adapter.
- Simple installation without additional software
- Response time: 100-250ms
- The transmitter of the extender is powered from the USB-C connector of the laptop 5V/1.5A . The receiver of the extender is powered using a USB micro cable that plugs into a USB port or 230V USB power adapter. For power supply you need to use a more powerful USB adapter (recommended USB adapters:: ppadapter-136, ppadapter-137, ppadapter-139, ppadapter-138 )
- Transmit and receive adapters have a short HDMI cable for easy connection to a computer and display or TV.
- The transmission distance depends on the actual environment.
- Operating temperature: -20°C to 60°C
- Humidity: 0-90% (non-condensing)
- TX and RX dimensions: 40mm x 200mm x 15mm
- Weight TX:40g, RX: 40g
- Black plastic case

It is advisable for the device to ensure optimal conditions for wireless signal transmission:
1, Eliminate signal interference from other wireless devices and remove obstacles that stand in the way of the signal (metal walls , glass, RF interference, etc. in the path of the signal)
2, The signal may also be interfered with by external environmental influences such as microwave oven, wireless mice and keyboards.,
3 Make sure the transmitting unit is at least 20 to 30 cm from the wall and is roughly in line with the receiving antenna of the device on the other side. The extender may not work well in specific locations such as a basement, tunnel, etc.

The set consists of
- 1x Transmitter
- 1x receiver - Receiver
- 1x USB cable - micro USB for power supply to the receiver and transmitter