WiFiHW 10GPOE 10 Gbit/s PoE-Injektor

802.3af/at/bt PoE injector with support for 10/100/1000/2500/10000 Mbps speeds for powering active components with integrated PoE extractor over Ethernet cable.

The injector is suitable for a wide range of network elements (access points, IP cameras, VoIP, modems, etc.).

Functions and features:
- An economical alternative to upgrade your network to IEEE 802.3at PoE+ or 802.3bt PoE++.
- Active PoE standard negotiation protects connected devices
- 10Gbps data transfer capacity
- PoE port with a maximum output of 90W
- Support for a wide range of IEEE 802.3at/bt (PoE+/PoE++) enabled devices
- Wall or DIN rail mounting flexibility for a variety of installation environments
- groove on the injector body for fixing multiple pieces into one block

Technical Specifications:
- Interface: 1x shielded RJ-45 LAN connector, 1x shielded RJ-45 LAN+POE connector.
- All 4 data pairs active for gigabit data rates
- Injector dimensions: 43 mm x 73 mm x 42 mm
- 90 watts delivered up to 100m with 56V power supply
- PoE operation in 4 pairs (Type 4 per 802.3bt)
- PoE operation in 2 pairs (Type 3 per 802.3at/af)
- Power jack input: 2.1 mm x 5.5 mm
- Wago terminal block (5.0mm for awg 16-20 wires)
- Output voltage corresponds to input voltage
- Passive cooling (quiet fanless operation)

Environmental characteristics:
Operating temperature range: 0 to 50 °C
Storage temperature range 0 to 50 °C
Relative humidity range - 5 to 90% non-condensing
The equipment is PELV according to NFPA 79

Installation:
The unit can be installed on a wall or DIN rail using the supplied DIN clip on the injector body.